Page 87 - Florida-Strut-Catalog-2021

Snap-A-Saddle Pro MultiTM - Adapters Adaptable Insulated Pipe Saddle
A ZSi-Foster Company
Snap-A-Saddle Pro Multi Saddle
Stabilizer
New Item
Typical Pipe Line
Stabilizer
D
3"
(76mm)
E
Mount to attach stabilizer to Saddle not shown.
Stabilizer is attached to Saddle with Strut Mount, Steel Angle, H & I-Beam and Clevis Mount adapters .
The use of this Stabilizer Adapter with 10" SASM1050G and 12" SASM1250G Saddles is suggested for additional support .
2.10" (53mm) B
Part Number
B
D
E
Compatible Only with Saddle
SASMSTAB1050G
10 .34" (263mm)
R5 .13
2 .24" (57mm)
SASM1050G
SASMSTAB1250G
11 .38" (289mm)
R6 .13
2 .28" (58mm)
SASM1250G
Floor Adapter
Typical Pipe Line
Snap-A-Saddle Pro Multi Saddle
New Item
10.42" (265mm) 8.5" (216mm)
4.25"
(108mm)
Ø 0.28" (7mm) Thru
Stabilizer
Floor Mount 0.75"
(19mm)
Clevis Mount Adapter
is used to attach Floor Mount & Stabilizer to Saddle.
Floor Mount works with 10" SASM1050G and 12" SASM1250G Saddles Requires the Stabilizer and Clevis Mount Adapters as shown in photo to the right.
Florida Strut Engineering Catalog
– 87 –
Part Number
Compatible Only with Saddle
Requires a Stabilizer
Requires a Clevis Mount
SASMFLOOR10-12G
SASM1050G & SASM1250G
SASMSTAB1050G & SASMSTAB1250G
SASMCLEVISG
WARNING: These products can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Technical Concrete Rooftop Electrical Beta Clamps Pipe & Conduit General Channel Nuts & Channel Introduction Data Inserts Supports Fittings Supports Fittings Hardware