Page 11 - ZSi-Foster Beta Hydraulic Clamps
P. 11
Beta Clamp Installation
MULTI-LEVEL ASSEMBLY INSTALLATION OF BETA ADAPTER
ZSi-Foster multi-level pipe clamps permit easy stacking of several tubes or Beta Adapters are installed in much the same manner as Beta Clamps.
pipes of the same group. The clamps are connected by stacking bolts. The weld plate is welded onto exiting structure and the Beta cushion and
Safety plates are inserted between the clamps to prevent the stacking bolts adapter is assembled onto it.
from turning.
The example below shows a stacking clamp added to a welded clamp,
however, ZSi-Foster stacking assemblies can be fitted to weld plates, rails,
or strut in the same manner.
(1) Weld Plate to
(1) After the Top Cushion is Supporting Steel
Added, Secure it with the
Stack Bolts
(2) Add Safety Plate to
Prevent Stacking Bolts (2) Push Bottom Half
from Turning of Clamp Onto Plate
(3) Insert the Desired
Adapter
(3) Assemble Another Clamp
Onto the Stacking Bolt in (4) Add Top Cushion
Same Manner as Single Clamps
are Installed
(5) Add Top Plate
and Bolt into Position
Stacking Assembly
• Weld on welding plate with a fixing bracket.
• Wedge on lower clamp-half, insert tube, add upper clamp-half and
tighten with fixing screws.
• Apply a locking plate to upper half of the clamp to prevent fixing screw
from twisting.
• Mount the second tube clamp in exactly the same way.
ZSi-Foster Engineering Catalog – 11 –